The original Jubilee® Clip, the product that started it all! For the vast majority of applications, this sturdy worm drive hose clip is more than suitable. Available as mild steel zinc protected or stainless steel clamp in both 304 (18/8) and 316 (18/10) grades of stainless steel; this product also has a band that is continuously threaded enabling extra flexibility when adjusting the clip to the correct size. The smooth inside profile of the band and rolled edges give protection for all types of hoses including soft hoses made from rubber or silicone.
All our original Jubilee® Clips are independently tested by the British Standards Institute (BSI) and carry the British Standard Kitemark™, which is universally regarded as the most stringent standard there is for a hose clip. Lloyds Register also accredits both grades of stainless steel clips for marine use.
The success of the company based on the principal foundation of quality. Through both the variety of our products and the quality of our service, we aim to be a company that you can rely on. Jubilee® Clips are manufactured to the very highest standards, using only premium grade materials. All our product ranges are systematically checked to their various Standards during manufacture and packing. Jubilee clips are KitemarkedTM to BS 5315:1991, the company is registered to BS EN ISO 9001:2008 Quality Management System and ISO 14001 Environmental Management System. The Original and High Torque stainless steel ranges are also Lloyd’s Type Approved, essential when used for marine applications. All Jubilee® products conform to the latest EU Directives.
Jubilee Clips conduct Neutral Salt Spray tests (NSS) according to BS EN ISO 9227 2006. The NSS test is performed in a sealed chamber at 35oC, where a 5% NaCl solution with a PH value of between 6.5 and 7.2 is sprayed continuously onto the clips. The duration of time shown in this product brochure shows the minimum number of hours the clips can withstand the salt spray test without significant signs of corrosion (red rust formation). It is difficult to transfer this information to a length of time the clips would survive in an application under normal environmental conditions, as these will vary from one location to the next. Two hundred forty hours is regarded by the British construction industry as the equivalent of a lifetime of 60 years in an urban outside environment in the UK.
Available in Mild Steel, Stainless Steel and SS316 Stainless Steel
|Product||Band width||Recommended Torque||Maximum Torque||Max pressure||Min.||Max.|
|(mm)||(Nm)||(Nm)||(Psi / Bar)||(mm)||(mm)|
|Jubilee® Clip 000 9.5-12mm||9.9||3.4||4.5||203||9.5||12|
|Jubilee® Clip M00 11-16mm||9.9||3.4||4.5||203||11||16|
|Jubilee® Clip 00 13-20mm||9.9||3.4||4.5||203||13||20|
|Jubilee® Clip 0 16-22mm||13||4.2||5.6||203||16||22|
|Jubilee® Clip 0X 18-25mm||13||4.2||5.6||203||18||25|
|Jubilee® Clip 1A 22-30mm||13||5.1||6.8||203||22||30|
|Jubilee® Clip 1 25-35mm||13||5.1||6.8||102||25||35|
|Jubilee® Clip 1X 30-40mm||13||5.1||6.8||102||30||40|
|Jubilee® Clip 1M 32-45mm||13||5.1||6.8||102||32||45|
|Jubilee® Clip 2A 35-50mm||13||5.9||7.9||102||35||50|
|Jubilee® Clip 2 40-55mm||13||5.9||7.9||102||40||55|
|Jubilee® Clip 2X 45-60mm||13||5.9||7.9||102||45||60|
|Jubilee® Clip 3 55-70mm||13||6.7||9||102||55||70|
|Jubilee® Clip 3X 60-80mm||13||6.7||9||44||60||80|
|Jubilee® Clip 4 70-90mm||13||6.7||9||44||70||90|
|Jubilee® Clip 4X 85-100mm||13||6.7||9||44||85||100|
|Jubilee® Clip 5 90-120mm||13||6.7||9||44||90||120|
|Jubilee® Clip 6 110-140mm||13||6.7||9||44||110||140|
|Jubilee® Clip 6X 120-150mm||13||6.7||9||18||120||150|
|Jubilee® Clip 7 135-165mm||13||5.9||7.9||18||135||165|
|Jubilee® Clip 7.5 158-190mm||13||5.9||7.9||18||158||190|
|Jubilee® Clip 8.5 184-216mm||13||5.9||7.9||18||184||216|
|Jubilee® Clip 9.5 210-242mm||13||5.9||7.9||18||210||242|
|Jubilee® Clip 10.5 235-267mm||13||5.9||7.9||18||235||267|
|Jubilee® Clip 11.5 260-292mm||13||5.9||7.9||18||260||292|
|Jubilee® Clip 12.5 286-318mm||13||5.9||7.9||18||286||318|