Affordable Delivery Charges
Best Prices Guaranteed 30 Money Back Guarantee
Top Quality Products Lowest Prices!

Jubilee Original Range

 

The original Jubilee® Clip, the product that started it all! For the vast majority of applications, this sturdy worm drive hose clip is more than suitable. Available as mild steel zinc protected or stainless steel clamp in both 304 (18/8) and 316 (18/10) grades of stainless steel; this product also has a band that is continuously threaded enabling extra flexibility when adjusting the clip to the correct size. The smooth inside profile of the band and rolled edges give protection for all types of hoses including soft hoses made from rubber or silicone.

 

All our original Jubilee® Clips are independently tested by the British Standards Institute (BSI) and carry the British Standard Kitemark™, which is universally regarded as the most stringent standard there is for a hose clip. Lloyds Register also accredits both grades of stainless steel clips for marine use.

 

 Zinc protected Clips 

Original Range Jubilee® Clips in zinc protected mild steel are the most popular clips in our range. Ideally suited for most day to day requirements for joining hose in areas such as the automotive industry and the automotive aftermarket, agricultural applications, such as irrigation and farm machinery, pneumatic and hydraulic applications in the industrial sector, hardware/DIY applications and in construction.


SS304 Stainless Steel Clips

The most versatile of clips in the Jubilee® range, our Original Range Jubilee® hose clips in 304 (18/8) stainless steel is widely used across all industries where hose clips are used to secure hoses, as well as for other applications. Their corrosion resistance enables their use in the marine, oil and gas and food sectors, as well as the agricultural, hardware and industrial sectors, where higher corrosion resistance is required.


SS316 Stainless Steel (HNSS) Clips

The Original Range Jubilee® hose clips with the highest corrosion resistance, our 316 (18/10) stainless steel Jubilee® clips, are the hose clip of preference in shipbuilding and maintenance when the highest level of corrosion resistance is demanded. Other areas where our Original Range 316 stainless steel clips are used are the food and chemicals industries, where highly corrosive acids can be present, and the oil and gas industry also favours this material grade.

 

The success of the company based on the principal foundation of quality. Through both the variety of our products and the quality of our service, we aim to be a company that you can rely on. Jubilee® Clips are manufactured to the very highest standards, using only premium grade materials. All our product ranges are systematically checked to their various Standards during manufacture and packing. Jubilee clips are KitemarkedTM to BS 5315:1991, the company is registered to BS EN ISO 9001:2008 Quality Management System and ISO 14001 Environmental Management System. The Original and High Torque stainless steel ranges are also Lloyd’s Type Approved, essential when used for marine applications. All Jubilee® products conform to the latest EU Directives.

 

Jubilee Clips conduct Neutral Salt Spray tests (NSS) according to BS EN ISO 9227 2006. The NSS test is performed in a sealed chamber at 35oC, where a 5% NaCl solution with a PH value of between 6.5 and 7.2 is sprayed continuously onto the clips. The duration of time shown in this product brochure shows the minimum number of hours the clips can withstand the salt spray test without significant signs of corrosion (red rust formation). It is difficult to transfer this information to a length of time the clips would survive in an application under normal environmental conditions, as these will vary from one location to the next. The British construction industry regards two hundred forty hours as the equivalent of a lifetime of 60 years in an urban outside environment in the UK.

 


Available in Mild Steel, Stainless Steel,  Marine Grade S3316

Shop for Products

Stainless Steel Clips

+Part No.

Adjustment

mm                Inches

Band

Width mm

Recommended

Torque Nm

Maximum

Torque Nm

Maximum

Pressure PSi

000MS/SS/316SS

M00MS/SS/316SS

00MS/SS/316SS

0MS/SS/316SS

0XMS/SS/316SS

1AMS/SS/316SS

1MS/SS/316SS

1XMS/SS/316SS

1MMS/SS/316SS

2AMS/SS/316SS

2MS/SS/316SS

2XMS/SS/316SS

3MS/SS/316SS

3XMS/SS/316SS

4MS/SS/316SS

4XMS/SS/316SS

5MS/SS/316SS

6MS/SS/316SS

6XMS/SS/316SS

7MS/SS/316SS

7.5MS/SS/316SS

8.5MS/SS/316SS

9.5MS/SS/316SS

10.5MS/SS/316SS

11.5MS/SS/316SS

12.5MS/SS/316SS


9.5-  12

11-  16

13-  20

16-  22

18-  25

22-  30

25-  35

30-  40

32-  45

35-  50

40-  55

45-  60

55-  70

60-  80

70-  90

85-100

90-120

110-140

120-150

135-165

158-190

184-216

210-242

235-267

260-292

286-318

3/8- ½

½-5/8

½-¾

5/8- 7/8

¾-1

7/8-11/8

1-13/8

11/8-15/8

11/4-1¾

13/8-2

15/8-21/8

1¾ -23/8

21/8-23/4

23/8-31/8

2¾-3½

3¼-4

3½-4¾

43/8 -5½

4¾-57/8

5¼-6½

6¼-7½

7¼-8½

8¼-9½

9¼-10½

10¼-11½

11¼-12½

9.9

9.9

9.9

13.0

13.0

13.0

13.0

13.0

13.0

13.0

13.0

13.0

13.0

13.0

13.0

13.0

13.0

13.0

13.0

13.0

13.0

13.0

13.0

13.0

13.0

13.0

3.4

3.4

3.4

4.2

4.2

5.1

5.1

5.1

5.1

5.9

5.9

5.9

6.7

6.7

6.7

6.7

6.7

6.7

5.9

5.9

5.9

5.9

5.9

5.9

5.9

5.9

4.5

4.5

4.5

5.6

5.6

6.8

6.8

6.8

6.8

7.9

7.9

7.9

9

9

9

9

9

9

7.9

7.9

7.9

7.9

7.9

7.9

7.9

7.9

203

203

203

203

203

203

102

102

102

102

102

102

102

44

44

44

44

44

18

18

18

18

18

18

18

18

Download our product information

Top