Slip-Resistant Wet Area Matting & PVC Roll-Out Duckboards

Wet Area Matting for Pools, Changing Rooms and Showers

Wet area matting is designed to provide a more comfortable and slip-resistant walking surface in locations exposed to water. Open-loop, slatted and modular constructions allow water to pass through the matting instead of remaining directly beneath users’ feet.

Typical applications include swimming-pool surrounds, changing rooms, showers, spas, saunas, leisure centres and compatible commercial workplaces. The correct product depends on whether the area is used barefoot or with footwear, the amount of water present, the underlying drainage and the required dimensions.

No mat can completely prevent slips. Effective performance depends on choosing the correct product, installing it on a suitable floor and maintaining both the matting and drainage system.

Compare Our Wet Area Matting Ranges

Kumfi Step Barefoot Wet Area Matting

Kumfi Step is a soft polyethylene roll-out matting system designed for barefoot comfort in wet areas such as swimming-pool surrounds and changing rooms. Its open construction allows water to drain through the mat while the broad upper profile provides a more comfortable surface underfoot.

Choose the required colour, mat size or roll length from the available options. Compatible colour-matched connectors should be selected separately where multiple sections need to be joined.

Trapwell Comfort Open-Loop Matting

Trapwell Comfort uses bonded soft vinyl loops to create a cushioned, free-draining surface. It is intended for compatible wet and dry leisure environments where barefoot comfort and drainage are important.

The open-loop construction is different from conventional slatted duckboard matting. Compare its overall height, width, available lengths and cleaning requirements before selecting it for a pool, shower, sauna or changing area.

Interflex Splash Modular Wet Area Matting

Interflex Splash is a modular PVC duckboard system intended for wet, barefoot environments. Its open structure allows drainage in multiple directions, while compatible connectors can be used to join sections along their sides or ends.

This range is suited to compatible swimming pools, changing rooms, showers, spas and other indoor or outdoor wet areas. Available widths, colours, roll lengths and connector options should be confirmed on the selected product page.

Interflex Style PVC Duckboard Matting

Interflex Style is a heavier grid-welded PVC duckboard designed for compatible commercial and industrial environments. The slatted construction allows liquids to drain through the matting and provides a raised walking surface.

This range may be considered for wet workplaces and selected areas exposed to oils, grease or chemicals. Chemical suitability must be checked against the exact substance, concentration, exposure time and product specification before installation.

How to Choose the Correct Matting

• Intended environment: Confirm whether the matting is designed for pools, showers, changing rooms, spas, industrial areas or another specific application.
• Barefoot or footwear use: Softer profiles are generally preferable for barefoot environments, while heavier duckboards may be better suited to commercial footwear traffic.
• Mat construction: Compare open-loop, slatted and modular drainage designs.
• Width and length: Measure the complete area and check whether you require a fixed mat, linear length or complete roll.
• Overall height: Check clearance around doors, thresholds, equipment and adjoining flooring.
• Joining method: Use only connectors designed for the selected matting range and colour.
• Indoor or outdoor use: Confirm suitability for the intended location rather than assuming every PVC or polyethylene mat can be used outdoors.
• Cleaning requirements: Choose a construction that can be lifted, cleaned and allowed to dry as required.

Measuring Your Wet Area

Measure the usable floor width and length rather than the room’s nominal dimensions. Account for doors, drains, steps, fixed equipment and any areas that must remain uncovered.

If several sections will be joined, check the connector orientation and calculate how many connectors are required. Do not assume that connectors from one product range will fit another, even when the products appear similar.

Only cut the matting when the selected product’s instructions confirm that cutting is permitted. Use suitable tools and leave clean edges that do not create a trip hazard.

Installation and Maintenance

Install the matting on a firm, level and structurally sound floor with adequate drainage. The mat must lie flat without curled edges, unsecured overlaps or unsupported sections.

Water, soap, oils and other residues can reduce slip resistance. Lift and clean the matting regularly, clear the underlying floor and drains, and allow the area to dry where practical. Cleaning products must be compatible with the matting material.

Inspect the matting and connectors routinely. Replace sections that have become damaged, permanently deformed, brittle or difficult to secure correctly.

Related Mats and Flooring

• Browse the complete mats and flooring range.
• View industrial mats and rubber flooring for workshops and commercial environments.
• Choose shock-absorption and protection mats for compatible gyms, fitness areas and equipment.
• Explore outdoor safety and erosion-protection matting for external ground applications.

Frequently Asked Questions

What is wet area matting?

Wet area matting is a raised, open or free-draining floor covering designed for locations exposed to water. Its construction allows liquid to pass through or beneath the walking surface.

Which matting is best for swimming pools and changing rooms?

Kumfi Step, Trapwell Comfort and Interflex Splash are positioned for compatible barefoot wet areas. Compare their materials, surface profiles, dimensions and drainage designs before choosing.

What is PVC duckboard matting?

PVC duckboard matting uses an open slatted or grid construction to create a raised walking surface while allowing liquids to drain through the mat.

Can wet area matting completely prevent slipping?

No. Slip-resistant matting can help manage risk, but its performance depends on correct selection, installation, drainage, cleaning, footwear and user behaviour.

Can separate rolls be joined together?

Some ranges have dedicated side or end connectors. Use only connectors specifically designed for the selected range and confirm how many are required before ordering.

Can roll-out matting be cut to size?

Some products can be cut, but this should not be assumed across the entire department. Check the instructions for the exact matting before cutting it.

Can the matting be used outdoors?

Selected products are intended for indoor and outdoor use. Confirm UV, weather and temperature suitability for the exact product and location.